How do I Thread the Bobbin on my PFAFF® Select™?Updated 3 months ago
Your PFAFF® Select™ 4.2, 3.2, or 2.3 features and easy to use with its front-loading bobbin. Let's load your bobbin together!
Be sure to switch off the power!
1. Removing the bobbin case and bobbin
Open the bobbin door at the left side swinging it open towards the front. Lift the latch (E) of the bobbin case and pull the bobbin case out of the machine. Release the latch and take the empty bobbin out of the bobbin case.
2. Inserting the bobbin
Insert the full bobbin (with the PFAFF® logo facing towards the bobbin case) into the bobbin case. In doing so, pull the thread sideways through slot A, then under the tension plate B until it rests in the opening (see arrow).
Check: Hold the bobbin case with the bobbin facing towards you. When you pull the thread, the bobbin must turn clockwise.
3. Inserting the bobbin case
Lift latch E and slide the bobbin case onto the hook pin C as far as it will go. Opening D of the bobbin case must face upwards.
Check: Pull the bobbin thread sharply. The bobbin case must not fall out of the hook.
