How do I Thread the Front-Loading Bobbin on the E10 & E20Updated 3 months ago

Your Husqvarna Viking H|CLASS™ E10 or E20 Sewing Machine features an easy to use front-load bobbin case. Let's thread your bobbin together! 

Step-by-Step Instructions:  

Prepare by raising the presser foot & turning the hand wheel toward you until the needle is in its highest position.

1. Open the hinged cover and lifting up on the latch of the bobbin case remove the case.
 

2.  Hold the bobbin case with one hand. Insert the bobbin so that the thread runs in a clockwise direction.
 

3. Pull the thread through the slit and under the finger.  

4. Hold the bobbin case by the hinged latch.

5. Insert case into the shuttle fully and then release the latch.