Singer® Machine FAQsUpdated 2 months ago
Basic Tips for Everyone
- Always turn the handwheel TOWARDS you (counterclockwise), as turning it in the opposite direction (away from you, clockwise) may throw off the timing and require repair at a service center. service. service.
- Always make sure the presser foot is in the DOWN position before sewing. Sewing with the presser foot in the up position will cause the thread to tangle and the bobbin to jam.
- Change needles regularly (after every 6 to 8 hours of use), as dull or weak needles can damage the machine and fabric. Only use SINGER needles in your SINGER sewing machine.
- Always make sure you use the correct bobbin for your machine. Class 66, Class 15 and Class 15J bobbins are very similar. However, using the wrong type of bobbin in your machine can cause damage.
Sewing
Q: Why is my electronic machine beeping? Why won't my machine sew? Why will my machine start to sew then stop?
A: You may have accidentally lowered the buttonhole lever located just to the left of the needle bar. To make sure it is in the correct position for sewing, place your finger under the lever and push up.
Also make sure the needle is set at the highest position and the bobbin winding spindle has been pushed back to the left.
NOTE: To set the needle at the highest position, turn the hand wheel TOWARDS you, until the needle moves to the highest position.
Finally, push the reverse button a couple of times, this will reset the machine.
If none of the troubleshooting techniques above solved the issue, please contact a SINGER® Service Center to have your machine serviced.
Q: How do I sew denim and heavy fabrics?
A: To sew denim, we recommend that you use a SINGER® denim style 2026 needle. Using another brand of needle can cause tension issues. You will need to set the machine for a straight stitch with the length regulated between 4 and 5 to allow the thread to wrap around the extra thickness of fabric. You will also get better results if you use the metal all-purpose foot that was originally attached to the shank when you took the machine out of the box. If you want to use top stitching thread, use it in the upper tension only; use regular all-purpose thread in the bobbin.
To sew other heavy fabrics, we recommend that you use a size 16 or 18 SINGER® brand needle. You will need to set the machine for a straight stitch with length regulated between 3 and 4. You will also get better results if you use the metal all-purpose foot that was originally to the shank when you are too the machine out of the box.
Sew at controlled moderate speed when sewing over multiple layers of seams.
Q: Why is my bobbin not winding evenly?
A: If your bobbin is winding unevenly, it’s possible you have not placed the thread correctly around the bobbin winding tension spring. If you believe the thread is placed correctly, please try wrapping the thread around the tension spring a second time – a common practice among avid sewers.
If none of the troubleshooting techniques above solved the issue, please contact a SINGER® Service Center, so they can adjust the tension for you!
Q: Why won’t my machine pick up the bobbin thread?
A: We get this question a lot. Don’t worry…easy fixes below!
First, make sure the bobbin-winding spindle (located on top of your machine) has been pushed back to the left for sewing. If it is not in the correct position, the needle will not go down and pick-up your bobbin thread.
Next, make sure your needle is inserted correctly, as far as it will go, with the flat side facing back. Also, make sure your bobbin is in correctly (not backwards) and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension.
Now, it’s time to draw up your bobbin thread.
Turn the handwheel (TOWARDS YOU ONLY, never turn the handwheel away from you) and hold the needle thread lightly. Tug on it as the needle goes down and then comes up again. You should see a small loop come up through the needle plate (this is your bobbin thread), using the tip of a narrow object like a pencil or scissors, pull the loop up and then pull both threads (top and bobbin) under the foot and toward the back of the machine.
If the above troubleshooting tips did not solve your issues, you may need to have your machine repaired for timing. If the timing is out, the needle thread is not meeting the bobbin thread in time to form a stitch.
Q. Why is my machine skipping stitches?
A. Skipped stitches can mean one of two things: needle issues or disrupted timing.
First, your needle may be dull or damaged and needs to be replaced. You should also check that you are using the correct needle for the type of fabric you are sewing. For example, knit and synthetic fabric requires a ballpoint SINGER® needle (style 2045). Next, check the needle is inserted correctly. The needle needs to be pushed as far up the needle shaft as possible. (It’s easy to insert the needle halfway, clamp it down and think it is inserted correctly.) Also, the flat part of the needle should be positioned towards the back. If the needle is not inserted correctly, it will not be able to pull up the bobbin thread and will cause skipped stitches.
If the trouble shooting tips above did not correct the problem, please take your machine into a SINGER® service center. It is possible the timing on the machine has been disrupted and needs to be reset.
Q. Why is the thread looping/bunching under my fabric?
A. Are you using a SINGER® brand needle? Are you using the bobbins that came with your machine?
Thread looping under your fabric is usually caused by not threading the upper tension correctly.
With the presser foot lever in the UP position and tension set at 4, follow the threading guides/graphics on the top of the machine.
Place the thread spool on the spool pin and secure with a thread spool cap.
While holding the thread with your right hand, use your left hand to take the thread down into the tension channel around the bottom and up the other side. As the thread comes up the opposite channel, and reaches the top, you will need to slip the thread from back to front into the take up lever. Continue to thread the machine, but do not thread the needle.
PRO TIP: Before threading the needle, perform this easy test to make sure the upper thread is threaded correctly. Making sure the presser foot is raised, pull the thread. It should pull easily. Now lower the presser foot, the thread should now resist when you pull it. There should be a significant increase in the tension of the thread. If there is no increased tension, the machine is not threaded correctly.
Q. Why is the thread looping/bunching on top of my fabric?
A. Thread looping on top of your fabric signifies that your bobbin is not inserted or threaded correctly.
Front Load Bobbins:
PRO TIP: The bobbin tension is pre-set at the factory and usually never needs adjusting. However, if the bobbin is threaded properly and the problem still persists, remove the bobbin case and adjust the screw on the side of the bobbin in small increments. Adjust as needed until loops disappear.
Top Drop-in Bobbins:
Q. Why doesn’t my stitch pattern match what is on my machine?
A. Different stitch patterns require different stitch lengths in order to sew correctly. Depending on your machine model, a decorative stitch such as a crescent or bead stitch will require the Stitch Length dial to be set at a smaller number (between 0.5 and 1.5). Continue to decrease the Stitch Length until you obtain the desired effect. If your machine has stretch stitches, you may be required to set the Stitch Length dial to the “S” or Stretch setting to obtain the stitch you want.
The width setting can also affect the look of your stitch. You will obtain the best results if you set the Stitch Width dial to the highest number.
Q. How often should I oil my machine?
A. Good question! If your machine manual does not include instructions on oiling, your machine has been pre-lubricated at the factory and will not need additional lubricating. However, you can put 2 to 3 small drops of sewing machine oil in the bobbin case area and on the needle bar as this will not harm the machine. You may also put a few drops on the handwheel where it meets the side of the machine.
If your manual does call for you to oil the machine, and you use your machine every day, we suggest that you lubricate once a week. If you use your machine once a week, lubricate once a month. If you only use your sewing machine once a month, lubricate once every three months.
We also recommend that you have your machine tuned-up by a qualified SINGER® technician every 3 to 4 years to keep it in good running order.
PRO TIP: If the machine has not been used for several years, we recommend a tune-up, just like you would do if you had not used your car for a long period of time. Lack of activity or movement will cause the lubricant to dry out and using the machine at that time can cause parts to break.
Q. What types of thread should I use?
A. Household sewing machines are designed to be used with regular all-purpose sewing thread. This thread can be purchased from your local sewing or fabric store. Most all-purpose thread is 100% polyester. If you are quilting, you can use cotton thread.
You can occasionally use a heavy-duty thread or buttonhole twist. However, using this type of thread constantly will eventually damage your machine’s tension. If you do use heavy thread, be sure to use a appropriately sized needle (size 16 or 18) and increase the stitch length.
Q. I can't see the take-up lever?
A. The take-up lever is not visible to the eye; it is hidden behind the front panel of your machine.
Make sure the needle is at the highest position, slip the thread into the opening between the front cover at the top of the machine, pull the thread down behind the lever and then pull it towards you, the take-up lever will then thread itself. The take-up lever has an opening at the back that allows the thread to slip into it from behind.
Embroidery
Please visit www.Futura-Support.com for embroidery troubleshooting tips.